Selig now offers the thinkRF H1000A RF Power amplifier, a discrete, rugged portable RF amplifier, With up to 43dB of signal gain and input power and surge protection regulation, its versatile power options make it a valuable asset for homeland security, emergency communications, non-linear connection detection, and rural communications.
Microchip Technology Inc., through its Silicon Storage Technology (SST) subsidiary, announced that its SuperFlash memBrain Neuromorphic memory solves the problem of WITINMEM neuroprocessing SoC. An embedded memory scheme is designed and the weight is calculated and stored by neural network. This is the first mass-produced sub-MA system to reduce speech noise and recognize hundreds of command words. And working with WITINMEM to incorporate its memBrain analog memory computing solution based on SuperFlash technology into its ultra-low power SoC to be brought to market in 2022
Silicon Designs has released its single-axle Model 2210 series. Available in a standard range from ±2g to ± 400G, the rugged design includes a MEMS capacitive accelerometer chip with high drive and low impedance buffering. All series MEMS capacitive accelerometer modules generate two analog voltage outputs that vary with the applied acceleration and are relatively insensitive to temperature changes.
New Yorker Electronics has released its new Innodisk industrial-grade DDR5 DRAM module. The module complies with all relevant JEDEC standards and is available in 16GB and 32GB capacities at 4800 t/s. Typical application areas include industrial/embedded, monitoring, automation, and healthcare
RECOM extends the range of DC-DC converters in the new version of the SOIC-16 package to provide better value. 5V (4.5-5.5V) input, 5V semi-stable output, rated voltage 0.5W (R05TE055s) or 1W (R05TE055s). Both units have a 3kVDC/ 1min(basic) insulation rating, and the SOIC-16 package has a footprint of only 10.35mm x 7.5mm and a 2.5mm profile, making it ideal for space-constrained designs
The Schroff-Nvent Monitoring and Management Support arm is a modern-looking design for mounting flat panel displays up to 24 inches, complete with keyboard and mouse, suitable for industrial or laboratory environments. The Idec HT3P Safety Commander Series support arm saves the cost of customizable programming pendant or permanent touch panel in each workplace, and can be programmed or maintained from a standard tablet
Infineon technologies has received Arm Platform Security Architecture (PSA) Level 2 certification for PSoC 64 MCU standard security devices. It is the first PSA level 1 processor of the Arm Cortex-M processor. Ideal for cloud-connected applications
The Power Integrations InnoSwitch3-EP family of ICs, available now from RS Components, dramatically simplifies the design and manufacture of flyback power converters, The family offers very high efficiency across full load range. They incorporate a multi-mode Quasi-Resonant (QR)/CCM flyback controller,Also offered is auto-restart output UV protection with option for peak power delivery.
Hartland Controls/Littelfuse HCK Motor Run Capacitors, available now from Mouser,The series uses thick, seven-micrometre film for greater reliability and quality.
TDK has released the Tronics AXO315, a small, high-performance single-axis closed-loop digital MEMS accelerometer. Its features allow for significant reductions in size, weight and material cost, making it suitable for a variety of applications. The device provides a force balancing architecture, a 24-bit digital SPI interface and SMD package.
Hirose has improved its compact coaxial connector portfolio to serve the growing 5G device market. Measuring just 2mm x 2mm with a 0.92mm mated height,the series answers the requirements for miniaturisation and high-performance.The patented C.FL Series coaxial connector extends this Hirose trend to support 5G applications.Applicable cable is 0.64mm diameter
Mouser is currently purchasing the LTC2688 SoftSpan DAC from Analog Devices, which provides engineers with advanced capabilities.
LEM has introduced a new line of current sensors ideal for retrofitting track side applications or reducing the cost of new installations. The TRS series offers three current ranges (10A, 30A, and 50A) with peak current measurements up to twice the nominal current. Sensors are IRIS compliant. Weighing just 35 grams, it is more than 70 percent lighter than previous core-split current transducers
NXP Semiconductors has announced the development of its NXP EdgeReady solution portfolio using high-performance 3D Structured Optical Module (SLM) cameras and I. Max RT117F cross MCU. Advanced liveness detection can be performed using 3D SLM cameras to help identify real people and spoofing techniques, which helps address consumer privacy concerns while also eliminating delays associated with cloud computing
Selig is now offering the NanoRanger NR-01 -- designed by AltoNovus -- an affordable, highly accurate 3.5-bit DC ammeter for precise measurement of very low currents. The backlit 11-bit 128 x 64 LCD provides a wealth of information on the current reading, and the device is specifically designed to reduce the load voltage to less than 50mV when making low-power current measurements.
Cliff Electronics offer a wide range of two-pole/mono 3.5mm female jack sockets in several colour choices for ease of identification on control panels.
OTech Group Inc. has introduced the world's first continuous laser-assisted deposition (CLAD) technology, which has the speed and capability to provide a complete commercial solution for multiple industries
Mouser now stocks the EP-SMA 27GHz connectors, adaptors, and cable assemblies from TE Connectivity.
