Murata has launched the ID-Bridge 4.0 suite, the development of which relied on deep collaboration with RFID experts at the University of Parma, as well as input from key players in the retail and consumer goods sectors. This solution works for a large number of different use cases, bypassing the need for customers to create custom systems from scratch.
Mouser is an authorized distributor of Vishay Intertechnology products worldwide, offering a stock of nearly 55,000 Vishay products and offering the latest products from a growing number of manufacturers.
Burklin Elektronik offers a range of micro fan units to meet the growing demand for small, high performance electronic components. Each fan motor, available in 30mm x 30mm, 40mm x 40mm and 50mm x 50mm sizes, for larger board sizes or higher power consumption, Micro fan coil units are also available in dual sizes of 60.5mm x 30mm, 80.8mm x 40mm and 100.5mm x 50mm, and fan motors provide voltages between 5V, 12V and 24V
RBZ has developed its services and products to provide custom solutions and SoM systems based on NXP processors. The entire product line includes an optional NXP certification element that enables products to meet the latest equipment certification standards
The new PolarFire FPGas and FPGA soCs supplied by Mrochip Technology reduce customers' system costs while enabling them to solve difficult thermal management challenges without losing bandwidth. The new device complements the company's suite of devices for integrated system solutions for applications such as intelligent embedded vision, machine learning, aerospace and defense, security, and embedded computing. And offers a unique combination of ideal size, industry low power and mid-range transceivers, logic, DSP and RAM resources.
Posifa Technologies has released an evaluation kit for its PVC4000 series MEMS Pirani digital vacuum sensor. The PVC4000EVK evaluation package enables Oems to quickly test drive the company's MEMS vacuum sensing technology for digital vacuum gauges and related applications. The sensors included in the evaluation package are calibrated to a vacuum range between 1 micron and 760,000 micron
Sek-ld20-0600l and SEK-LD20-2600B Liquid Flow Evaluation Kit, the kit provides engineers with a quick and easy way to evaluate the functionality of the LD20-0600L and LD20-2600B liquid flow sensors. Each kit includes three liquid flow sensors, three LD20 base stations and PC software
The Murata MGJ2 SMD series in Europe was developed to provide optimized positive and negative voltages for IGBT/MOS and SiC gate drivers. Series have partial discharge performance, CMTI & GT; 200kV/µs and has a continuous isolation barrier to withstand voltages up to 2.5kV. Gate drive applications featuring reliable performance in high voltage applications
Routers, switches, and line cards require higher bandwidth, port density, and connections up to 800GbE to handle escalating data center traffic driven by 5G, cloud services, AI, and ML applications, overcome with what Microchip Technology calls the industry's most compact 1.6T low-power PHY solution, Its PM6200 Meta-DX2L delivers a 35% reduction in power consumption per port compared to the META DX1, the 56G PAM4's predecessor, which is the industry's first Terbit-level PHY solution.
Microchip Technology has partnered with the European Commission (EC) and industry alliance Clean Sky to develop the first baseless power module that meets aerospace standards. Microchip's BL1, BL2, and BL3 series of baseless power modules provide greater efficiency in AC/DC and DC/AC power conversion and generation by integrating their silicon carbide power semiconductor technology. The modules come in a low-profile, low-inductance package with power and signal connectors that designers can solder directly to the PCB. To speed up development and improve reliability
FTDI Chips has announced a new development solution. The hardware is based on FT4233HP multi-channel interface chip. The new high-speed USB Serial /FIFO evaluation board will allow engineers to start implementing USB power delivery schedules more quickly. The size of the board is 138.5mm x 77mm. It provides one pair of type-c power output ports. The first port can serve as both the receiver (receiving power) and the source (providing power). The second port serves only as a receiver
Toshiba Electronics Europe offers 12 new motor control MCUS in its M4K series of devices. This is the first product in the new advanced TXZ+ family. They are beginning mass production of another 10 motor control MCUS in the M4M group. All of these products are based on the ARM Cortex-M4 core, with FPU and MPU, running at speeds up to 160MHz, and MCU providing onboard flash memory (128kB/256kB) of code and 32kB of data, as well as 24kB of plain RAM and DMAC
Binder offers new control cabinet feed-through connectors with different codes and pin numbers for the M12 series 713, 813, 814, 823 and 824. M12 connections provide efficient, reliable and economical cabling for fieldbuses, sensors and actuators in the field of automation technology. They are suitable for operating temperatures between -40℃ and +85℃ (814 series :-25℃ to +85℃).
Concurrent Technologies has introduced a new 3U VPX plug-in card (PIC). The TR K9x/ 6SD-RCX is based on the 11th generation Intel core processor, which has four CPU cores and comes with 16GB of welded DDR4 DRAM with in-error correction code for high-performance general-purpose computing tasks.
Laird Thermal Systems has released its enhanced OptoTEC OTX/HTX series of miniature thermoelectric coolers that offer a 10% increase in cooling capacity compared to standard thermoelectric coolers, with greater temperature differences and greater efficiency. High-performance solid state cooling units are used to control the temperature of thermally sensitive optoelectronic components, occupying an area as small as 3mm × 4mm, and are suitable for optoelectronic applications with tight geometric space constraints. There are two versions of this series.
Qvo QPF4532 5.0ghz wi-Fi-6 front end module (FEM) is optimized for IEEE 802.11ax systems. The QPF4532 has a frequency range of 5150MHz to 5850MHz, up to 31dB transmission gain, and a low 2dB noise figure. At 3.3V supply voltage, the performance of the finite element method is focused on optimizing PA. This feature saves power consumption while maintaining high linear output power and leading-edge throughput
Anson Semiconductor has added a 16-megapixel sensor to the XGS family, the XGS 16000. The device has the same construction and footprint as other XGS CMOS image sensors and supports 65fps full resolution readings. The device is designed with a unique 1:1 square aspect ratio and ensures optimal light sensitivity. The sensor is compatible with industry standard camera formats of 29mm2, using commercial c-mount lenses
Distec GmbH has introduced the new Tianma TFT display TM116VDSP01-00. Offers 1920 x 1080 pixel high resolution and 1600 CD /m² brightness, as well as a wide operating temperature range of -20℃ to +80℃. For intuitive operation display, the screen offers the PCAP multi-touch screen in a modern design with up to 10 contacts, and the display offers optional protective glass to resist adverse external influences in public places or other challenging areas
